Find Truck Crane, Mobile Crane, Wheel Loaders on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Engineering Machinery > Other Engineering Machinery > XCMG 30 Ton Hydrauic Truck Crane Qy30k5 (ection boom)

XCMG 30 Ton Hydrauic Truck Crane Qy30k5 (ection boom)

Basic Info

Model No.:  QY30K5

Product Description

Model NO.: QY30K5 Condition: New Type: Small Crane Application: Construction Usage Main Girder Form: Single Girder Moving Type: Wheel Trademark: SUNY Origin: China Certification: ISO9001: 2000 Shaft Number: 3 Max. Total Rated Lifting Capacity: 30 Tons Sling Type: Wire Rope Power Source: Hydraulic Installation: Assembled Specification: ISO HS Code: 87051022 General Introduction of XCMG 30 Ton Hydrauic Truck Crane QY30K5
Wide cab
Five-segment U section boom
Single cylinder luffing and double-winch
Manual mechanical control
Spacious and luxury streamline cab
U boom system
Constantly optimize the boom section, completely releasing the carrying capacity of the plates, which makes the lifting more reliable and safer.
Compact boom head
Extend the jib length, which can extend the working radius to the most.
Hydraulic pipeline
The pipeline adopts high-precision cold drawing steel pipe, matching with the cutting ferrule, which is good looking and easy to maintain.
Operating cab
It has large space and wide views. The control levers and instrument buttons are at hand.
Torque limiter
The colorful LCD display of the torque limiter can shows all the important operating information.
Reasonable matching, energy efficiency and environmental protection, and strong power meet the economical running of the required power

Specification of XCMG 30 Ton Hydrauic Truck Crane QY30K5
Overall length (mm) 12.07m
Overall width (mm) 2.5m
Overall height (mm) 3.39m
Wheel base                                                    type
be the same as heavy camion   good current 11.00-20
Dead weight in travel state (kg) 32400kg
Axle load
  1st axle(kg) 7000
  2nd axle(kg) 25400
Model of engine 6CL280-2,206KW    DF engine
Engine rated outputkW(r/min) 206
Rated torque N.m(r/min) 1170(1112)
Rated turning speed (r/min) 2200
Travl speed speed (km/h) 75
  Min. speed(km/h) 3~4
Turning diameter
  Min.turning diameter (m) 22
Min. groun clearance(mm) 291
Approach angle 19°
Departure angle 13°
Braking distance(at30km/h) ≤10 m
Max.ggradabilit 30%
Fuel consumption (L) ~40
Lifting performance rated lifting load (t) 30
Min. working radius (m) 3
Turning radius at swing table tail(mm) 3065
Max.load moment
  Base boom(kN.m) 1025
  Full_extent boom(kN.m) 460
Outrigger extension distance
  Longitudinal(m) 5.85
  Lateral (m) 6.0
Lifting height
  Base boom (m) 10.1
  Full-extent boom(m) 38.7
  Full-extent boom+jib(m) 47.6
Boom length
  (m) 10.1
  Full-extent boom(m) 38.5
  Full-extent boom+jib(m) 46.8
Attaching angle for jib 0°15°30°
Workng speed parameter
Boom elevating time
  Full lifting(s) 150
  Full falling (s) 140
Max.slewing speed(r/min) 2.5
Outrigger telescoping time
  Outrigger beam extending synchronously(s) 35
  Outrigger beam retracting synchronously (s) 30
  Outrigger jack extending synchronously(s) 40
  Outrigger jack retracting synchronously (s) 35
Hoisting speed(single rope)
  Main winch with full load (m/min) 75
  Main winch without load(m/min) 120
  Auxiliary winch with full load(m/min) 75
  Auxiliary winch without load (m/min) 120
Sound level outside cabin dB(A) ≤118
Sound inside cabin dB(A) ≤90

Contact us if you need more details on Truck Crane. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Mobile Crane、Crane. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Engineering Machinery > Other Engineering Machinery